Buhler 2895 - Manual (Page 42)

bühler
Allied Front-End Loader
- 40 - P4110
Possible Attachment Interference (S2895 and 2895 TSL)
Regular loader linkage setup allows for
maximum rollback.
TSL loader linkage setup provides
reduced rollback.
Large attachments (such as the C2000
Grapple) may contact the S2895 or
2895 TSL pivot plate. This can occur if
the loader is fully rolled back. This
interference is avoided in factory
assembly. The loader linkage can be
reversed to increase attachment
rollback if large attachments are not
used. See following description below
to reverse links.
Before reversing the linkage remove
attachments and engage the hydraulic
loader lock (refer to page 23 for
hydraulic loader lock instructions).
Refer to pages 36 and 37 for
corresponding item and part numbers.
Remove 1.25 x 7.25 pin item 40
connecting the linkages items 11, and
12.
Remove 1.25 x 6.25 pin connecting
the linkage item 12 to the quick attach
item 2.
Reverse the (4) linkages, and reinstall
pins and quick attach.