Antilock brake system (abs) warning light, Tow/haul mode light, Stabilitrak® indicator light – Buick 2011 Enclave User Manual

Page 149: Antilock brake system (abs), Arning light -23, Tow/haul mode light -23 stabilitrak, Indicator light -23, Stabilitrak, Indicator light

Advertising
background image

Black plate (23,1)

Buick Enclave Owner Manual - 2011

Instruments and Controls

5-23

Antilock Brake System
(ABS) Warning Light

The ABS warning light comes on
briefly when the ignition key is
turned to ON/RUN. This is normal.
If the light does not come on then,
have it fixed so it will be ready to
warn you if there is a problem.

If the light stays on, turn the ignition
to LOCK/OFF. If the light comes on
while driving, stop as soon as
possible and turn the ignition off.
Then start the engine again to reset
the system. If the light still stays on,
or comes on again while driving, the
vehicle needs service. If the regular

brake system warning light is not
on, there are still brakes, but no
antilock brakes. If the regular brake
system warning light is also on,
there are no antilock brakes and
there is a problem with the regular
brakes. See Brake System Warning
Light on page 5‑22
.

Tow/Haul Mode Light

This light comes on when the
Tow/Haul mode has been activated.

For more information, see Tow/Haul
Mode on page 9‑27
.

StabiliTrak

®

Indicator

Light

This light comes on briefly while
starting the engine. If it does not,
have the vehicle serviced by your
dealer. If the system is working
normally the indicator light goes off.

If it stays on, or comes on while
driving, there could be a problem
with the StabiliTrak system and the
vehicle might need service. When
this warning light is on, the system
is off and will not limit wheel spin.

This light flashes when the
StabiliTrak system is active.

See StabiliTrak

®

System on

page 9‑30 for more information.

Advertising