Buick 2011 Enclave User Manual

Page 67

Advertising
background image

Black plate (13,1)

Buick Enclave Owner Manual - 2011

Seats and Restraints

3-13

3. Pull up on the release lever

located on the back of the seat.

4. Push the seatback forward to

lay flat.

To return the seatback to the
seating position:

1. Raise the seatback into place by

using the pullstrap from the rear
of the vehicle, or by pushing it
into place from inside the
vehicle.

{

WARNING

If either seatback is not locked, it
could move forward in a sudden
stop or crash. That could cause
injury to the person sitting there.
Always push and pull on the
seatbacks to be sure they are
locked.

2. Push and pull on the seatback to

make sure it is locked in place.

{

WARNING

A safety belt that is improperly
routed, not properly attached,
or twisted will not provide the
protection needed in a crash.
The person wearing the belt could
be seriously injured. After raising
the rear seatback, always check
to be sure that the safety belts
are properly routed and attached,
and are not twisted.

3. Reconnect the center safety belt

mini-latch to the mini-buckle.
Do not let it twist.

4. Pull on the safety belt to be sure

the mini-latch is secure.

Advertising