Stopping engine, Lifting/transporting – MBW GPR135 User Manual
Page 9
- 6 -
LIFT & SECURE HERE
Stopping Engine
1.
To stop the compactor from traveling forward, return
the engine throttle to idle position.
2.
Whenever possible, it is recommended to let the
engine idle for one or two minutes before stopping.
3.
Gas engines: Turn the switch on the engine to
“STOP” position.
Diesel engines: Move the throttle control to the
“STOP” position.
4.
Turn off the fuel valve where applicable.
Lifting/Transporting
1.
Lift unit by center lifting eye on rollcage.
2.
The unit must be transported in the upright position.
DO NOT lay machine on its side.
3.
Secure or tiedown unit using lift eye or roll cage when
transporting.
WARNING
Always stop the engine before:
Adding fuel.
Leaving the equipment unattended, even if only
for a minute.
Before making any repairs or adjustments to the
machine.