Synergy 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit User Manual
Page 42
Advertising
52. Bolt the A-pillar back to the floor and tack into place once satisfied with fitment. Do
not fully weld at this time. Repeat A-pillar fitment on the passenger side. Steps 53-
56 will cover the differing details. All other aspects of A-pillar fitment remain the
same.
53. Remove the glove box. Do so by opening it and squeezing the sides inwards as to
allow the stop tabs to clear. Once clear, allow to drop all the way down and then
remove from its hinges.
Advertising