Synergy 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit - Manual (Page 59)

78. Also, oblong the hole out about 3/8” towards the frame.
79. After trimming, and check fitting that rocker can be installed, coat any exposed areas
of steel with paint and install using the 3/8” x 2.5” long bolt included in the kit as
shown.
Use a washer under the head of the bolt from the top.
Place the rocker spacer included in the kit between the rocker and
the bushing plate.
Fasten together using a 3/8” flange nut.
See images below.