Synergy 5221-A - 2011+ Jeep JK 2/4 Door Front Cage Kit User Manual
Page 47
62. Once everything is welded and cool, deburr welds as needed and weld cage the
desired color.
Speaker Install
63. Due to the A-pillar location, the stock speakers will not easily remount in their stock
location. Therefore we recommend replacing them with a 4” speaker. We provide a
clean mounting option for running a 4” round speaker near the stock location.
This install features a behind the dash install using the 4” speaker
mounting brackets provided in the kit. (Steps 65-71 will cover this
option) **Note, this installation should be done now before
continuing.**
Behind Dash Install
64. Begin by bolting the 4” speaker of choice to the 522109-01 speaker mount.
You will need to drill holes for mounting
Secure the speaker to the back side of the panel to allow for easy
removal once installed.
Be sure to orient hardware to allow for speaker removal once
installed behind dash. See images below.