Bell'O 8335 - Manual (Page 18)

Step 3: Mounting the TV
English
Understanding the locking mechanism
This 8335 TV Wall Mounting Kit For Dummies has a unique feature which enables you
to easily lock the Monitor Arms (MA) onto the Wall Plate (WP) so that your TV cannot
be removed. Before attempting to attach the TV with the monitor arms to the wall bracket, make
sure that the right and left side locking mechanisms are in the unlocked position. Using a
screwdriver, turn the large screw head on the side of the bracket 90° toward the front of
the bracket, as shown in Figure 15. Repeat this procedure on both sides of the bracket.
Large Screw
Head
Locking Bar
Shown Up in
Unlocked Position
To Unlock
Figure 15
If your audio, video, and power cables will not be accessible after you mount
the TV, you need to make those connections now. Before doing this, however,
make sure all TV and component power cords are not plugged into any electri-
cal outlets and your audio and video equipment is turned off. Make sure you
leave enough slack so you can install the mount without any interference.
Don’t forget those wires!