Bell'O 8335 - Manual (Page 3)

English
NEVER exceed the maximum load capacity of 280 lbs (127 kg)
Precautions!
• This mounting bracket was designed to be installed and utilized ONLY
as specified in this manual. Bell’O International Corporation will not
be responsible for failure to assemble as directed or for the improper
assembly, use, or handling of this product.
• Improper installation of this product may cause damage or serious
injury. Bell'O International Corporation cannot be liable for direct or
indirect damage or injury caused by incorrect mounting, incorrect
use, or incorrect assembly.
• If the mounting bracket will be attached to any structure other than
those specified in this manual, only a licensed professional
contractor/installer should perform this installation. The supporting
structure must support, at minimum, four times the combined weight
of the mounting bracket and TV. It is the responsibility and liability of
the installer to ensure the suitability of the supporting structure.
• This product should NEVER be mounted to metal framing studs.
• Check carefully to ensure that there are no missing or damaged parts.
Never use defective parts. If any parts are damaged or missing, call
Bell'O International Corporation at 888-779-7781 and parts will be
shipped directly to purchaser. Please contact Bell’O International Corp.
before attempting to return products to the point of purchase.
• Specifications are subject to change without notice.
• The maximum weight of your television cannot exceed the maximum
weight rating of your mount or any attached Bell'O ® UL listed adapters
sold separately, whichever is lower.