Snorkel TB85J Fixed Axle CE User Manual

Page 49

Advertising
background image

Chapter 8 – Operation

TB80/TB85J Fixed Axle – 0112823EE

45

1. On dual fuel machines, set the fuel switch to either

LPG or gasoline.

2. Open the shut-off valve on the tank if using LPG.

3. Pull the emergency stop button (refer to Figure 8.2)

outward. Insert the key in the controls selector and
turn the switch to the lower control position.

Figure 8.2 – Lower Controls

4. Press the start button until the engine starts, then

release. The engine will not start if the controls se-
lector switch is left in the lower control position for 30
seconds or longer before starting the engine. The
controls selector switch must be turned back to off
before the engine will start.

5. Let the engine warm to operating temperature.

6. Turn the boom speed knob to slow.

7. Hold the ground operation switch in the on position

while operating the boom and turntable control toggle
switches.

8. Hold the appropriate toggle switch in the desired di-

rection.

9. Gradually turn the boom speed knob to contol the

main boom raise/lower and turntable rotation speed.

10. Release the function toggle switch to stop movement.

11. Place the ground operation switch in the off position

when no functions are being operated.

Upper Controls

The upper controls may be used for driving the aerial plat-
form and positioning the booms and platform while on the
job.

Use the following procedure to operate machine func-
tions using the upper controls.

1. At the lower controls, pull the emergency stop but-

ton outward. Insert the key in the controls selector
and turn the switch to the upper control position.

2. On dual fuel machines, set the fuel switch to either

LPG or gasoline.

3. Open the shut-off valve on the tank if using LPG.

4. Enter the platform and securely close the gate.

5. Attach the fall restraint lanyard to one of the anchor

points.

6. Pull the emergency stop outward (refer to Figure 8.3).

Figure 8.3 – Upper Controls

7. Turn the anti-restart master switch to on and pause

a few seconds while the alarm sounds to alert others

Top

Front

Emergency
Stop Button

Master Start Switch

Emergency
Stop Button

Ground

Operation Switch

Engine/Emergency

Power Switch

Start Switch

Advertising
This manual is related to the following products: