Snorkel TB85J Fixed Axle CE - Manual (Page 6)

Chapter 1 – Introduction
2 TB80/TB85J Fixed Axle – 0112823EE
Operation
The aerial platform has built-in safety features and has
been factory tested for compliance with Snorkel specifi-
cations and industry standards. However, any personnel
lifting aerial platform can be potentially dangerous in the
hands of untrained or careless operators.
A
Warning
The potential for an accident increases when the
aerial platform is operated by personnel who are
not trained and authorized. Death or serious injury
can result from such accidents. Read and under-
stand the information in this manual and on the plac-
ards and decals on the machine before operating
the aerial platform on the job.
Training is essential and must be performed by a quali-
fied person. Become proficient in knowledge and actual
operation before using the aerial platform on the job. You
must be trained and authorized to perform any functions
of the aerial platform. Operation of the aerial platform must
be within the scope of the machine specifications.
The operator bears ultimate responsibility for following all
manufacturer’s instructions and warnings, regulations and
safety rules of their employer and/or any state or federal
law.
Maintenance
Every person who maintains, inspects, tests, or repairs
the aerial platform must be qualified to do so. Following
the daily prestart inspection in this Operator’s Manual
will help keep the aerial platform in optimum working con-
dition. Other maintenance functions must be performed
by maintenance personnel who are qualified to work on
the aerial platform.
A
Caution
Welding current can be very intense. Damage to
electronic components can result. Connect the
ground clamp as close as possible to the area be-
ing welded. Disconnect battery cables and any mi-
croprocessors and engine control modules before
welding on the machine.
If it becomes necessary to weld aerial platform compo-
nents as a method of repair, take all precautions to pre-
vent damage to electronic circuitry and devices on the
machine. This includes, but may not be limited to, dis-
connecting battery cables and electronic devices.
Do not modify this aerial platform without prior written
consent of the Snorkel Engineering Department. Modifi-
cation may void the warranty, adversely affect stability,
or affect the operational characteristics of the aerial plat-
form.
Owner and User Responsibilities
All owners and users of the aerial platform must read,
understand, and comply with all applicable regulations.
Ultimate compliance to national safety regulations is the
responsibility of the user and their employer.
Additional Information
For additional information contact your local dealer or
Snorkel at:
Snorkel International
P.O. Box 1160
St. Joseph, MO 64502-1160 USA
785-989-3000
http://www.snorkelusa.com