JLG LSS Boom - Manual (Page 21)

SECTION 1 - OPERATION
3124287 – JLG Lift – 1-11
1.11 JLG ACCESSORIES, INCLUDING
WORKSTATION IN THE SKY TM
The Load Sensing System must be configured for proper
operation with JLG approved Accessories. Calibration of
the Load Sensing System can be performed with the
Accessory mounted in the platform.
JLG Approved Accessories (Except
SkyGlazier)
A platform-mounted accessory slightly reduces the
amount of load that can be carried before the vehicle
becomes overloaded. This extra load must be accounted
for to enable the accessory to be mounted during Calibra-
tion.
A De-Rating is provided for JLG Sky Accessories via decal
and/or the JLG Workstation in the Sky
TM Accessory Man-
ual. This De-Rating must be entered into the LSS Mod-
ule’s ACC’Y Personality to cause the system to accurately
indicate overload (by the De-Rating factor).
Example: Consider the case of the JLG SkyWelder (SkyC-
utter) with a De-Rating of 70LBS (32KG). Without De-Rat-
ing, the Load Sensing System will declare Overload at
550LBS (250KG) in the 500LBS Capacity Zone (110% of
500LBS) and at 1100LBS (499KG) in the 1000LBS Capac-
ity Zone (110% of 1000LBS). When the De-Rating for Sky-
Welder (SkyCutter) is entered into the ACC’Y Personality,
the LSS will declare Overload 70LBS (32KG) earlier
(480LBS or 218KG in the 500LBS Capacity Zone;
1030LBS or 467KG in the 1000LBS Capacity Zone).
Procedurally, the Accessory should be mounted to the
platform and the LSS Module’s ACC’Y Personality should
be set using the guidelines above. Calibration should be
performed as outlined in this manual. During Testing &
Evaluation, it should be noted that the LSS will declare
Overload with less platform load (by the amount of the De-
Rating).
SkyGlazier Accessory
This Accessory does not have a simple De-Rating since it
has different impact on the 500LBS and 1000LBS Capac-
ity Zones (Moment limits in 1000# Zone).
SKYGLAZIER (BASE ONLY)
When not using the SkyGlazier, recommended JLG vehi-
cles can safely carry the SkyGlazier’s Base without impact
on normal capacity ratings.
Procedurally, mount the SkyGlazier’s Base but not the
Tray. Set the LSS Module’s Personalities according to the
table below and perform a Calibration.
SKYGLAZIER (BASE & TRAY)
When using the SkyGlazier, recommended JLG vehicles
can carry 400LBS (181KG) in the 500LBS Capacity Zone
(Total Platform Weight with Tray Installed), and 750LBS
(340KG) in the 1000LBS Capacity Zone (Total Platform
Weight with Tray Installed).
Procedurally, mount the SkyGlazier’s Base but not the
Tray. Set the LSS Module’s Personalities according to the
table below and perform a Calibration.
Personality Setting
OVERLD 550LBS (249KG)
OVERLD3 1100LBS (499KG)
ACC’Y 0LBS (0KG)
Personality Setting
OVERLD 450LBS (204KG)
OVERLD3 800LBS (363KG)
ACC’Y 0LBS (0KG)