BURY CC 9048 USER Manual - Manual (Page 8)

7
5. Connections at electronic box
The other components of the hands-free car kit are connected to the electronic box. You can find the
following connections:
Connection possibilities:
1 CHARGING PORT: Micro USB socket to connect the extension cable - the charging cable
or an optional update cable can be connected therec
2 PWR/LSP/LINE OUT: 24-pin socket for the connection of the molex jack from the ISO cable harness,
used as power supply of the hands-free car kit outputs music and voice (telephone)
3 MICROPHONE: Connection for external microphone
4 LINE IN: Connection for AUX-IN cable for inputting of music
5 DISPLAY: Connection for display (if present)
6 REMOTE CONTROL: Connection for remote control with 3 buttons display (if present)
1 - CHARGING PORT
An extension cable is connected to connection no. 1 (micro USB socket). You can connect a charger or your
mobile phone to the other end of the cable. Connection of the BURY ChargingCradle Universal is optional.
2 - PWR/LSP/LINE OUT
The hands-free car kit in the vehicle is connected to the car radio with the ISO cable harness. If the
radio has ISO socket at its backside, the installation can be done without additional installation mate-
rial. If not, certain adapters, e.g. ISO2CAR or AUDIO2CAR, can be ordered from an authorised dealer
for the respective radio or vehicle make.
Using the ISO cable harness, you can input music and voice signals (telephone) of different types into
the radio or play them back via the radio. If the present radio has a LINE-IN or AUX-IN input at the
front side or backside, the four open LINE cables of the ISO cable harness can be connected to them
using appropriate adapters (e.g. 3.5 mm stereo jacks or cinch connectors). The radio amplifier is used
for music playback in that case. Please observe the notes in the instruction manual of the radio con-
cerning “AUX input”. Generally, voice signals are only output in the two front loudspeakers while music
is played back on all four loudspeakers (front and rear). Different installation options can be selected
with the hands-free car kit for that purpose.