Bel Canto Design PRe6 - Manual (Page 4)

page 4 © 2002 bel canto design, Ltd. PRe6 User’s Guide rev082102
Because the PRe6 runs so cool it can
be placed in many system locations
without compromise. We do not rec-
ommend placing weights or other
objects directly on the PRe6. This
may mar or scratch the chassis fin-
ish. Do not use harsh chemicals
when cleaning the outside of your
PRe6. Single Ended RCA and Balanced XLR
connectors are available. XLR jacks
allow balanced hookup using the
standard North American pin config-
uration:
Pin 1 Ground
Pin 2 Input +
Pin 3 Input -
The Bel Canto PRe6 represents a new
direction in audiophile grade control
preamplifiers. Its unique and power-
ful dual zone and multi-channel
options coupled with unequalled 2-
channel audio performance define a
new genre of control preamplifier:
• All analog, low noise, low distortion
architecture for controlling 2 to 8
channel sources: 2-5.1/7.1 inputs, up
to 12 2-channel inputs including 1-
balanced input
• Fully balanced XLR outputs for driv-
ing up to 500 feet of interconnect
• Programmable options for inputs:
function (5.1/7.1, stereo, disable),
name, main level, zone 2 level and
soft mute level
• 4-layer PC board design for opti-
mum signal routing, grounding and
power supply routing
• Latest generation of active audio
buffers, level controls and output
drivers provide superb measured
and subjective audio quality
• Independent display/control and ana-
log transformers and power supplies
for optimum power isolation for sen-
sitive analog circuitry
• Multi-stage power supply regulation
for high isolation from power line
effects
• Precision resistors and film capaci-
tors in signal path
• RS232 port for integration with a
system controller and for easy soft-
ware updates
• Dual triggers for powering main 2-
channel and surround amplifiers
• Independent Tape/Zone2 routing
with buffered outputs
• Red/Green LED rear panel indica-
tors to aid in system setup and
cabling
Placement and Initial Setup
Design Features
IMPORTANT: Make all connections before powering your unit.