ADS-TEC IPC1100/1200 - Manual (Page 23)

Industrial PCs IPC1100/1200
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
23
6.7 E
XTERNAL DRIVES
By default, no drive for removable media (CD/floppy disk) is integrated in the device.
Additionally the system provides an USB interface, with which an external drive could be
connected. In this case, you'd have to ensure that the equipment used is suitable for use
in an industrial environment.
Warning:
Connecting or disconnecting of external drives during operation is inadmissible, since it
cannot be excluded that the drive is in use at this point in time. Data loss might occur if
not observed!
Pos : 33 /D atent ec hni k/Schnitts tell en/Temparat urüber wac hung/T empar atur über wachung f ür O PC / I PC 5100 / 5300 / 5500 / 1100 / CPC / PLC / / OTC / ITC-Serie @ 0\ mod_1158930009922_681. doc @ 887 @
6.8 T EMPERATURE MONITORING
The device includes a function for monitoring the internal temperature. If temperature
inside the device rises above a predetermined level, then an error is indicated via the SYS
LED on the front / interface plate. The alarm can only be reset by switching off the device.
This gives the user time to acknowledge the alarm and introduce appropriate measures.
• Red flashing: Temperature too high in the device
Pos : 34 /D atent ec hni k/Schnitts tell en/DVI-I Ans chl uss /DVI-I Ansc hl uss für IPC 1100 / 5100 / 5300 / 5500 / PLC 500 / MSD 5012 / 5015 @ 0\ mod_1158931991936_681.doc @ 892 @