AIM Sports Green Laser Scopes - Manual (Page 18)

15 20
CENTERING WINDAGE / ELEVATION ADJUSTMENTS
Making windage and elevation adjustments moves the entire erector
system horizontally and vertically inside the scope. If the erector system is
off to one side – as a result of having been mounted on a non-adjustable
mount – the adjustments won’t provide equal travel in all directions. To
regain full balanced travel, you must re-center the adjustment as follows:
1. Turn the windage adjustment to the point that it stops moving.
2. Counting the clicks or hash marks, turn it all the way in the other
direction.
3. Turn the dial back half the amount of clicks or hash marks counted.
4. Repeat this process for the elevation adjustment
MICROMETER-STYLE ADJUSTMENTS
AIM Target, Hunting, and Tactical scopes have micrometer-style windage
and elevation adjustments. A click for each adjustment division can be both
heard and felt so adjustments to the scope can be made without looking
at the dials.
To illuminate the reticle:
1. Grasp the illumination dial located on left side of scope, when scope is
pointing down range.
2. Turn the dial clockwise from the OFF position to the first number
indicated on the dial.
3. View the target through the scope to determine if the reticle is bright
enough to stand out clearly against the target.
To preserve the life of the battery, always remember to turn the illumination
dial to the OFF position when the scope is not in use. For prolonged
storage, remove the battery.
If the reticle fails to illuminate or appears dim even on the highest
illumination setting, it is necessary to change the battery.
WARNING: Always check to ensure that the firearm is unloaded before
changing the battery in the scope.