AirLive Air3GII User Manual
Page 52
3. Making Configuration
AirLive Air3GII User’s Manua
l
48
3.4.3. QOS
Provide different priority to different users or data flows, or guarantee a certain level of
performance.
1. QOS Control: Check Enable to enable this function.
2. Bandwidth of Upstream: Set the limitation of upstream bandwidth
3. Local IP : Ports: Define the Local IP address and ports of packets
4. Remote IP : Ports: Define the Remote IP address and ports of packets
5. QoS Priority: This defines the priority level of the current Policy Configuration.
Packets associated with this policy will be serviced based upon the priority level set.
For critical applications High or Normal level is recommended. For non-critical
applications select a Low level.
6. Enable: Check to enable the corresponding QOS rule.
7. User Rule#: The QoS rule can work with Scheduling Rule number#. Please refer to
the Section 3.1.4.7 Schedule Rule.
Click on “Save” to store your settings or click “Undo” to give up the changes.