AirLive Air3GII - Manual (Page 62)

4. Troubleshooting
AirLive Air3GII User’s Manua l 58
4
4.
Troubleshooting
This Chapter provides solutions to problems for the installation and operation of the Air3GII.
You can refer to the following if you are having problems.
1 Why can’t I configure the router even the cable is plugged and the LED is lit?
Do a Ping test to make sure that the WiFi Combo Router is responding.
Note: It is recommended that you use an Ethernet connection to configure it.
Go to Start > Run.
1. Type cmd.
2. Press OK.
3. Type ipconfig to get the IP of default gateway.
4. Type “ping 192.168.1.254”. Assure that you ping the correct IP Address
assigned to the Air3GII. It will show four replies if you ping correctly.