AirLive Air4G User Manual
Page 35
3. Making Configuration
AirLive Air4G User’s Manua
l
30
C. Dynamic IP Address:
1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet
WAN connection is broken, the device will automatically activate the WWAN
connection and keep you connected to internet with the alternative WWAN
broadband service. Meanwhile, if the device detected that the Ethernet WAN
connection is recovered, your broadband connection will be switched to use the
Ethernet WAN service.
2. Host Name: Optional, required by some ISPs, for example, @Home.
3. Connection Control: There are 3 modes to select:
(1) Connect-on-demand: The device will link up with ISP when the clients send
outgoing packets. ]
(2) Auto Reconnect (Always-on): The device will link with ISP until the
connection is established.
(3) Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.