AirLive Air4G - Manual (Page 37)

3. Making Configuration
AirLive Air4G User’s Manua l 32
(2) Auto Reconnect (Always-on): The device will link with ISP until the connection is
established.
(3) Manually: The device will not make the link until someone clicks the
connect-button in the Status-page.
4. Maximum Idle Time: the amount of time of inactivity before disconnecting your
PPPoE session. Set it to zero or enable “Auto-reconnect” to disable this feature.
5. PPPoE Service Name: Optional. Input the service name if your ISP requires it.
Otherwise, leave it blank.
6. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The
default MTU value is 0 (auto).
E. PPTP