AirLive Air4G - Manual (Page 44)

3. Making Configuration
AirLive Air4G User’s Manual 39
3.1.3. Wireless Settings
Wireless settings allow you to set the wireless configuration items.
1. Wireless Module: You can enable or disable wireless function.
2. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN).
Client stations can roam freely over this device and other Access Points that have
the same Network ID. (The factory default setting is “default”)
3. SSID Broadcast: The router will broadcast beacons that have some information,
including SSID so that wireless clients can know how many AP devices by scanning
the network. Therefore, if this setting is configured as “Disable”, the wireless clients
can not find the device from beacons.
4. Channel: The radio channel number. The permissible channels depend on the
Regulatory Domain. The factory default setting is as follow: channel 1~11 for North
America. (Channel 1~13 for European (ETSI); channel1~ 14 for Japan).
5. Wireless Mode: Choose “B/G mixed”, “B only”, “G only”, “N only”, “G/N mixed” or
“ B/G/N mixed”. The factory default setting is “B/G/N mixed”.
6. Authentication mode: You may select one of authentication to secure your wireless
network: Open Shared, Auto, WPA-PSK, WPA, WPA2-PSK, WPA2,
WPA-PSK/WPA2-PSK, or WPA /WPA2.