AirLive Air4G - Manual (Page 39)

3. Making Configuration
AirLive Air4G User’s Manua l 34
F. L2TP
1. Activate WWAN for Auto-Failover: With this function enabled, when the Ethernet
WAN connection is broken, the device will automatically activate the WWAN
connection and keep you connected to internet with the alternative WWAN
broadband service. Meanwhile, if the device detected that the Ethernet WAN
connection is recovered, your broadband connection will be switched to use the
Ethernet WAN service
2. IP Mode: Please check the IP mode your ISP assigned, and select “Static IP
Address” or “Dynamic IP Address”.
3. My IP Address and My Subnet Mask: The private IP address and subnet mask
your ISP assigned to you.
4. Gateway IP and Server IP Address/Name: The IP address of the L2TP server and
designated Gateway provided by your ISP.