AirLive CoreNVR 9 - Manual (Page 22)

4. System Setting
AirLive CoreNVR 9/16 User’s Manual 16
4.3.1 Network
DHCP setting: Checked the “Obtain IP address automatically (DHCP)” to enable auto
get IP from DHCP server.
MAC address: Display MAC address of this NVR.
IP Address: Input the fixed IP address If you disable the DHCP function, then click
“Test” button to detect IP conflict.
Subnet Mask: User define
Gateway: User define
Obtain DNS from DHCP: User define
Primary DNS: User define
Secondary DNS: User define
DNS setting: Checked “Obtain DNS from DHCP” to get DNS setting from DHCP server,
it only works on DHCP was enabled. If “Obtain DNS from DHCP” was
disabled, you could key-in DNS server IP in the text box.
4.3.2 PPPOE
Enable / Disable: Select from the radio boxes to enable or disable PPPOE function.
Account: Key-in user name to login PPPOE server here.
Password: Key-in login PPPOE server password here.
IP address: Display current IP address get from PPPOE server.
Subnet Mask: Display current subnet mask get from PPPOE server.
Gateway: Display current gateway get from PPPOE server.
Status: Display PPPOE status.
4.3.3 UPNP
Friendly Name: Display UPnP friend name on network.
4.3.4 UPnP Transversal
Enable UPnP Traversal to auto request port mapping with router, and define maximum
and minimum port value here.
Port Range: User define
External IP Address: User define
4.3.5 Server
Enable server option for start HTTP and RTSP server, after remote service started,
Users could be connecting remote service by IE browser.
HTTP Port: Set HTTP service port here. Default 80.
RTSP Port: Set RTSP service port here. Default 554.
RTSP over HTTP: Enable RTSP over HTTP function, the remote live streaming will use
HTTP protocol and HTTP port.