AirLive CoreNVR 9 - Manual (Page 30)

5. System Management
AirLive CoreNVR 9/16 User’s Manual 24
Resolution: Change monitor current display resolution, please confirm change result,
or system will recover old resolution after 15 seconds.
Style: You may change the interface to Simple / Normal / Professional / Advance.
Image: Adjust monitor Brightness, Contrast, Saturation, Sharpness, and Hue value.
※ Note: Only available on D-sub interface.
Maintenance:
Default Setting: Reset all setting to factory default value.
Backup Setting: Export backup setting file to remove-able storage device.
Restore Setting: Restore a backup setting file from remove-able storage device.
Firmware Upgrade: Select a firmware file from remove-able storage device, then
click “Firmware Upgrade” button to begin update firmware job.
System Restart: Restart CoreNVR system.
Audio: Adjust audio input or output gain value for better audio quality.
5.2 Disk Management
The CoreNVR supports up to two 3TB HDD install in the system, you may also manage
all USB storage devices in this page.
Device list: Display all devices were detect on NVR, and their information.
Partition Button: Select a storage device, and click “Partition” button, system will
remove all data and partitions on selected device, and create a new
partition.
Mount / Un-Mount button: Mount or Un-Mount USB stick.
S.M.A.R.T button: Display the Hard Disk S.M.A.R.T status.