AirLive CoreNVR 9 - Manual (Page 35)

6. Event Setting
AirLive CoreNVR 9/16 User’s Manual 29
Disconnect Alarm: Lost camera connection.
Digital Input_0 ~ Digital Input_4: Detected input.
Schedule Trigger: Trigger by schedule setting.
HDD Error Alarm: Record failed or HDD error will send event alarm.
4. Click “Add” button below Event Schedule List table
5. Select event will detected week days and the time periods of each day.
6. Set Alarm detail parameter.
Week Days: Select week days for event notification.
Time Period: Select time period for event notification.
Alarm Setting
Alarm Condition:
For Motion event, true means alarm trigger by motion, false means alarm
triggered by no motion.
For DI event, true means alarm trigger by DI in open status, false means alarm
triggered by DI in close status.
For Schedule trigger, true means alarm is triggered in during schedule period,
false for alarm triggered when not in schedule period.
Alarm seconds: Define the alarm time period when the event is triggered.
Merge seconds: is set for merge two same alarms between setting seconds.
7. Click “Add” button below Action list table.
8. Select an action, when event was triggered system will execute it.