AirLive CoreNVR 9 - Manual (Page 37)

6. Event Setting
AirLive CoreNVR 9/16 User’s Manual 31
6.4 Event Action Type
Buzzer: Buzzer work after event was triggered.
Digital Output: Select a device to change DO status after event was triggered.
Set output to “True”, DO will change to “Close” status when alarmed.
Set output to “False”, DO will change to “Open” status when alarmed.
Display on Channel: When event was triggered, system will display OSD string on
selected channels.
Record: When event was triggered, system will force selected channels record.
※ Note : 1. System must switch “Schedule Monitor” On event was triggered.
2. The selected channels must has set “Recording schedule” when event
was triggered.
Snapshot:
System will snapshot images with selected channels, and save snapshot to event snapshot
folder automatically, you could search them in “Event Snapshot” page in “System
Management”.
E-Mail:
1. Select channels for snapshot or record a file when event is triggered.
2. Select Snapshot or Record a period video file
3. Setup Pre-Alarm seconds and Post-Alarm seconds for record file.
4. Select users to send notification E-Mail when event is triggered.