AirLive MFP-101U - Manual (Page 19)

10. Please set the network settings for the MFP Server manually. By default,
the network settings are as follows.
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
If you have selected “DHCP”, the MFP Server will try to determine your
network settings automatically. If a DHCP Server is present within the
network, the MFP Server will automatically obtain and configure the
network settings assigned by the DHCP Server. The assigned IP Address
will be shown in the IP Address fields. If no DHCP Server is present within
the network, please assign the network settings of the MFP Server
manually. Please click “Next” once you have found appropriate network
settings for the MFP Server.
Note: The MFP Server IP Address should be in the same network
segment with the connected computer. If the network settings are incorrect,
a message will be prompted to remind you after you click “Next”. Please
make sure that you have set the right settings before going to the next step.
12 AirLive WFP-101U User’s Manual