AirLive MFP-101U - Manual (Page 77)

8.4.2 Wireless
If you want to use the MFP Server through wireless LAN, please set up the
MFP Server through Ethernet first and make sure your wireless LAN setting is
correct. After setting the wireless LAN, unplug the Ethernet cable and restart
the MFP Server, then you can start to use the MFP Server through wireless
LAN. If the wireless configuration does not work, please plug the Ethernet
cable again, restart the MFP Server and configure the MFP Server through
Ethernet until the wireless LAN settings are correct.
You can enable/disable the wireless function and set up the wireless
parameters for the MFP Server from here. The parameters include “Function”,
“Mode”, “ESSID” and “Channel Number”. You can manually set the wireless
network that you want to connect in this page or use the “Site Survey” function
to automatically search for an available wireless network and associate with it.
Function is for user to disable, enable or let the MFP Server auto select to
connect to the wired or wireless network. If “Disable” is selected, the MFP
Server can only connect to the network through wired Ethernet. If “Enable” is
selected, the MFP Server can only connect to the network through Wireless
70 AirLive WFP-101U User’s Manual