AirLive MFP-101U - Manual (Page 31)

5. Using the MFP
After you have followed the install wizard to finish the MFP installation, the
MFP is now connected to your computer. You can start sharing print, scan,
card reader or fax function provided by the MFP.
Tip 1: If you have finished using the MFP, please click “Disconnect” to
release the MFP. Another users can’t use the MFP until the MFP is released
Tip 2: It is recommended to enable “Idle Timeout” setting. The MFP Server
will auto release your connection to the MFP after a period of idle time that
you have assigned. So the MFP will not be occupied too long and other users
can share the MFP frequently. Please refer to Section 6.1 for more
information.
24 AirLive WFP-101U User’s Manual