AirLive MFP-101U - Manual (Page 39)

Contact Information – When the current user has set
his “Contact Information”, you can see it here. You can
contact with the current user for asking to disconnect the
MFP.
Refresh Refresh the “MFP Server List” immediately.
Connect Let the MFP be connected to your computer.
Disconnect Disconnect the selected MFP.
Add to My Favorite Add the MFP Servers that you frequently use to “My
Favorite List”.
Auto Release when
idle time is over xx
minutes (5-255)
To avoid you occupy the MFP overtime; you can setup
idle timeout. It is used to disconnect the current
connection after the MFP is idle for a specified period of
time. By default, it is never timeout. It is recommended to
enable idle timeout setting after the MFP and MFP
Server are installed completely so that the MFP resource
will not be occupied easily.
32 AirLive WFP-101U User’s Manual