Unix system network, 1 introduction, Introduction – AirLive MFP-101U User Manual
Page 119
13. UNIX System Network
13.1 Introduction
The MFP Server is available for TCP/IP printing by Unix LPD (Line Printer
Daemon) protocol. The LPD protocol originated with Unix release is based on
the BSD version of Unix and supported under most versions of Unix.
This chapter explains how to configure the MFP Server for TCP/IP operation,
and how to modify configuration files on your Unix system to allow printing to
the MFP Server. The configuration examples in this manual follow the syntax
for BSD based Unix systems. Please refer to the related system
documentation for the correct syntax of your systems.
To configure the MFP Server for LPD printing, perform the procedures below:
1. Enable MFP Server’s TCP/IP Support.
2. Set up MFP Server’s IP address.
3. Verify MFP Server’s IP Address.
4. Configure remote LPD printing on the host.
5. Print a test page.
In the next sections, we will describe these five procedures step by step.
112 AirLive WFP-101U User’s Manual