AirLive POE-FSH808PW - Manual (Page 36)

4. Web Management
AirLive POE-FSH808PW User’s Manual 31

VLAN ID (VID):
Since you want the handover to other switches take place smoothly, the VLAN IDs
(Numbers) need to be like on the rest of your network.
(On other switches you may have the chance to configure names. These are just for your
reference. Only the numbers are important!)
 Add: Enter a VID, select the VLAN member for this entry and then press this button to
add a VLAN entry to the table. The available range of VID is from 1-4094.
 Delete: Select a VID in the table and then press this button to remove a VID entry from
the table. After deleted, the VLAN and its member port setting is gone.
 Update: Modify the existing VLAN setting. Select the VID, the below settings display,
you can change the settings and then press the Update button to update the settings.
 VLAN Member Port Select:
Select the VLAN Member here.