AirLive POE-FSH808PW User Manual

Page 37

Advertising
background image

4. Web Management

AirLive POE-FSH808PW User’s Manual

32

VID Source Port:

This table allows you to configure PVID of the port. Select the port number while you add

VLAN and select VLAN member ports, the selected ports' PVID will be the VID you typed.
*Please note that one port only can have one PVID. While one port joins multiple VLAN

groups, the PVID is important to identify where the incoming traffic will be forwarded to

.

For example: Port 3 is the member of VLAN 100 and 200, PVID of it is 100. The traffic

received from the connected PC is usually untagged; the incoming packets will then be

tagged with PVID within the switch and then follow the VID table to forward traffic.

Port VID Map:

This table shows the PVID of the ports.

VLAN Member Table:

This table shows the VID and its member ports.

Configuration Steps:

First, add your VLAN Groups (identified throughout your network by unique and constant

numbers). Start with IDs from 100 and up is often. Starting with 100 gives you enough free

room and less compatibility issues.

Second, enter “100” in the field right of VID Setting, then select or deselect which ports are

member of that group. Your up and downlink ports need to be the member of every existing

group. If the port joins different VLAN groups, the VID Source Port allows you to define the

PVID.

After configured and selected, then click on Add to create the table and related port

mapping. The new group with its setting will be displayed at the bottom of the screen.





Advertising