AirLive POE-FSH808PW - Manual (Page 43)

4. Web Management
AirLive POE-FSH808PW User’s Manual
38
 Discard: The incoming packet will be discarded at the source port.
 High: The incoming packet will be forwarded with the high priority.
 Low: The incoming packet will be forwarded with the Low priority.
 User_Define x: We can define the port number and mask by ourselves. The Port
defines the TCP/UDP Port number. The mask defines which bit is ignored within the IP
address bit 0 ~ bit 7.
For example, UDP/TCP port = 65535(Hex 0xFFFF = 11111111 11111111) and mask = 5
(Hex 0x0005 = 00000000 00000 101 ), this means 65530 (11111111 11111010),
65531(11111111 11111011), 65534(11111111 11111110) and 65535(11111111 11111111) are
all taken into account. UDP/TCP port =65535 and mask=0, this means only 65535 is taken
into account.
4.9 Security
There are many management functions can be set or performed if you click the
Security on Home Page, including:
 MAC Address Binding
 TCP/UDP Filter
In the following sessions, we will talk in detail about the management functions under the
Security menu.
4.9.1 MAC Address Binding
This function provides a method for the administrator to specify the relationship between
the physical port and the MAC address. Only the packet with specified source MAC
address can be forwarded. By specifying the MAC address to each port, the network
administrator can prevent the unauthorized user from accessing the switch. Each port can
correspond to up to 3 MAC addresses.
To activate the port binding function, you should enter the correct MAC address, select the
port number, and set the port binding to “enable” and then press “update”.