AirLive POE-FSH808PW - Manual (Page 54)

4. Web Management
AirLive POE-FSH808PW User’s Manual 49
 VLAN Uplink Setting: If VLAN uplink function is enabled and the destination port of an
unicast packet is located at the next VLAN, this packet will be forwarded to the uplink
port. Choose the Uplink Port X for the port ID. The Uplink X will be the uplink port of its
VLAN.
*Note: There is a functional conflict between VLAN striding and VLAN uplink. Imagine what
will happen if both VLAN striding and VLAN uplink are enabled simultaneously? In this case,
the switch selects VLAN striding and ignores the VLA
4.14 Logout
The administrator has write access for all parameters governing the onboard agent. User
should therefore assign a new administrator password as soon as possible, and store it in a
safe place.