Wirless settings, 1 client + ap mode, Client + ap mode – AirLive WH-9200AP User Manual
Page 11
Advertising
2. Wirless Settings
2.1 Client + AP Mode
In this mode, the Radio1 will operate in 5GHz 802.11a as Client mode while Radio2 will
operate in 2.4GHz 802.11g/b as AP mode. The Radio1 operates in 5470~5725MHz,
Radio2 operate in Channel 1~11 only.
Client mode is also known as Ethernet Client. In this mode, the WH-9200 AP will act as a
WLAN card to connect with the remote AP. Users can connect PC or local LAN to the
Ethernet port of local LAN to the Ethernet port of the client mode WH-9200AP. This mode is
mostly used as a CPE device for WISP subscriber.
Client Mode
WISP Outdoor CPE
Local Area Network
9
AirLive WH-9200AP User’s Manual
Advertising