AirLive WH-9200AP - Manual (Page 4)

1. Introduction
1.1 Overview
The WH-9200AP is a dream device for WISP to build their wireless networks. The
WH-9200AP features 2 Atheros that run in 5GHz or 2.4GHz frequency band. There is an
intergraded 802.3af POE port to let you run the WH-9200AP at up to 100 meter distance
away from the power source.
Dual Wireless + 2 LAN Ports
The WH-9200AP is equipped with 2 Atheros radios. The radio 1 runs in the 11a 5GHz
mode while the radio 2 runs at the 2.4GHz 11b/g mode. Radio1 can only operate in 5470
to 5725MHz, while Radio2 can only operate in 2.4Ghz Channel 1 to 11.
In addition, 2 programmable LAN ports are available configuration.
802.3af PoE Port
WH-9200AP is equipped with an 802.3af Power over Ethernet port. It thus can be powered
by a PoE PSE and operate at up to 100 meter away.
VLAN & QoS
WH-9200AP provides TAG VLAN feature allows service provider to control service content
of each SSID network all the way back to core router. The QoS feature allows prioritizing
the different package according the 802.11e WMM protocol and triple play (Voice, Video
and Data). Bandwidth control feature allow WH-9200AP to limit the bandwidth on distinct
IP/MAC or on the total device.
IP67 Environmental Protection Enclosure
With IP-67 industrial standard enclosure, WH-9200AP is highly protected against dust and
water. So that WH-9200AP can be used in a hardened environment.
1.2 Installing WH-9200AP
This section describes the installation procedure for the WH-9200AP. It starts with a
summary of the content of the package you have purchased, followed by steps of how to
power up and connect the WH-9200AP. Finally, this section explains how to configure a
Windows PC to communicate with the WH-9200AP.
AirLive WH-9200AP User’s Manual 2