AirLive WH-9200AP - Manual (Page 25)

3. System Management
You can review the Device information of your WH-9200AP by the
interface.
The information shows the current firmware version, IP address of
your WH-9200AP.
Wireless1 MAC and Wireless2 MAC show the MAC address of
the two radios, the information helps to setup WDS connection by
remote access point.
The Uptime records the live time of WH-9200AP after boot.
dd: day; hh: hour; mm: minute
3.1. Change Password
It’s recommended to set your own password instead of using default factory password. The
default factory password is “airlive” all letters are in lower case. To change the password,
press the Password Settings button to enter the Password Settings screen; then enter
the Current Password followed by the New Password twice. The entered characters will
appear as asterisks.
23 AirLive WH-9200AP User’s Manual