AirLive WH-9200AP - Manual (Page 29)

Community String For Write: For read-write operation, you need to configure a write
“community string”.
Assign a specific name and IP address for your SNMP trap manager:
A trap manager is a remote SNMP management station where special SNMP trap
messages are generated (by the router) and sent to in the network.
You can define trap managers in the system.
You can add a trap manager by entering a name, an IP address, followed by pressing the
ADD button.
You can delete a trap manager by selecting the corresponding entry and press the
DELETE SELECTED button.
To enable a trap manager, check the Enable box in the corresponding entry; to disable it,
un-check the Enable box.
Some extra feature of WH-9200AP does not show in the wizard because some higher
knowledge of parameters of them is required. They are classified in the tab of “Advances
Setting”, such as the Multi SSID for VLAN setting and 802.11e QoS configuration.
27 AirLive WH-9200AP User’s Manual