AirLive WH-9200AP - Manual (Page 30)

3.4. Firmware Upgrade
You can upgrade the firmware of your WH-9200AP (the software that controls your
WH-9200AP’s operation). Normally, this is done when a new version of firmware offers new
features that you want, or solves problems that you have encountered with the current
version. System upgrade can be performed through the System Upgrade window as
follows:
To update the WH-9200AP firmware, first download the firmware from the distributor’s web
site to your local disk, and then from the above screen enter the path and filename of the
firmware file (or click Browse to locate the firmware file). Next, Click the Upgrade button to
start.
The new firmware will be loaded to your WH-9200AP. After a message appears telling you
that the operation is completed, you need to reset the system to have the new firmware
take effect.
Do not power off the device while upgrading the firmware.
It is recommended that you do not upgrade your WH-9200AP unless the new firmware
has new features you need or if it has a fix to a problem that you’ve encountered.
AirLive WH-9200AP User’s Manual 28