AirLive WL-350HD - Manual (Page 33)

30
standard protocol built on the top of TCP / IP. This assures accurate synchronization to the
millisecond of computer clock times in a network of computers.
8.1.3 Initialize
Reboot:
Click this button to reboot this IP Camera. A confirmation dialogue will appear and then
click “OK” to execute. It takes one minute to complete the reboot process.
Factory Default:
Click this button to recover this IP Camera to the factory default setting. A confirmation
dialogue will appear and then click “OK” to execute. The network indicator on this IP
Camera will start to blink. This IP Camera will reboot automatically after completing
adjustments to the default setting. Don't turn off this IP Camera until the device reboots.
Backup Setting:
You can save the setting data of this IP Camera into a file. Click “Save” and follow the
instructions on the browser to save the setting data file to the location you specified.
Restore Setting:
Download the saved setting data of this IP Camera. Click “Browse” and select saved file.
Click “OK” and this IP Camera is adjusted according to the loaded data and then restarted.
Firmware Update:
Update the device software. Click “Browse” and select the file for updating. A confirmation
dialogue will appear. Click “OK” to start. This IP Camera will reboot upon completion.
Note: When updating the firmware version, please use the file specific for the model.
Otherwise, some problems may occur. Unless the updating completed, please don’t turn off
the power or disconnect the network.