AirLive WL-350HD - Manual (Page 42)

39
Note: The frame rate is up to 15 fps at 1280x1024, and up to 30 fps at 640x480. However,
if you would like choose frame rate over 15 fps, the IMAGE SIZE of H.264/MPEG-4/MJPEG
setting page has to been selected 320x240 or 640x480 at the same time.
Quality:
z
Auto: The quality and bit rate will be adjusted automatically according to the frame rate.
z
Fixed Quality: Select the value of quality among Medium, Good, Delicate and
Excellent.
Fixed Bitrate:
Set the bitrate of MJPEG image transmission for a line. You can select one among 64Kbps,
128Kbps, 256Kbps, 384Kbps, 512Kbps, 768Kbps, 1Mbps, 1.5 Mbps, 2 Mbps, 3 Mbps, 4
Mbps, 5 Mbps, and 6 Mbps.
Note: Concerning how to select the suitable image quality for Fixed Quality or Fixed Bitrate,
please refer to the CHAPTER 10. APPENDIX / A. Frame-rate & Bitrate Table.
8.2.5 3GPP
Viewer Authentication:
z
On: If the viewer authentication is On, the users will be requested to key-in username
and password when using QuickTime Player to have live viewing.
z
Off: If the viewer authentication is Off, you can have live viewing on computer by
QuickTime Player after entering “rtsp://ip:port/video.3gp” on the URL column directly.
Image Size:
Available image size for 3GPP are 160 x 120 and 320 x 240.
Frame Rate:
Set the frame rate of the 3GPP image. Choose one between 5 or 10 fps.
Quality: