AirLive WL-350HD - Manual (Page 84)

81
input or by the built-in motion detection function. Select “On“ to send the image and audio
file to HTTP server linked with the alarm detection.
Alarm Sending:
Select On to set to send command with connection to the alarm detection.
Alarm-Motion Detection:
Click it on for using Motion Detection function as a sensor. You can set motion detection
function at the motion detection function screen.
Note: You can set motion detection at motion detection screen. (Please go “Setting →
Advanced → Motion Detection → Setting”) For more details, you can check Chapter 9.7.
z
Parameter: the parameter of CGI (defined in URL of HTTP → General) is from your
target device. For example, move=down.
z
Message: message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.
Alarm-Audio Detection:
Click it on for using Audio Detection function as a sensor. You can set audio detection
function at the audio detection function screen.