AirLive WL-350HD - Manual (Page 73)

70
Note: If you use g-mail as your mail server, you should set 25 as your port number and
tick SSL box.
Authentication:
Select the authentication required when you send an email.
z
Off: Select if no authentication is necessary when an email is sent.
z
On: When authentication is necessary an e-mail is sent, select one of the authentication
methods from the followings.
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP Before SMTP:
Select when POP before SMTP authentication is necessary when an e-mail is sent.
Note：When you set to On, be sure to select either or both SMTP or / and POP before
SMTP.
POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or type
the IP address of the POP server. This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP user account.
User name, Password:
Type the user name and Password of the user who has the mail account. This setting is
necessary when the SMTP server which sends e-mails performs authentication.
Recipient E-mail Address:
Type the recipient e-Mail address up to 64 characters. You can specify up to three
recipient E-mail addresses.
Administrator E-mail Address:
Type the Administrator e-Mail address up to 64 characters. This address is used for reply