AirLive WL-350HD - Manual (Page 85)

82
Note: You can set audio detection at audio detection screen. (Please go “Setting →
Advanced →Audio detection → Setting”) For more details, you can check Chapter 9.8.
z
Parameter: the parameter of CGI (defined in URL of HTTP → General) is from your
target device. For example, move=down.
z
Message: message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.
Alarm-Network Link Down:
Click it on to receive a snapshot or a video clip while network link down. If Attached File
Type (go “Setting → Advanced → FTP client → General”) was clicked as video clip, you
can using Alarm buffer function as a sensor. It’s for recording audio file in the IP CAM
before and after disconnected network.
Note: You can set alarm buffer at alarm buffer screen. (Please go “Setting → Advanced
→ Alarm Buffer → Setting”) For more details, you can check Chapter 9.6.
z
Parameter: the parameter of CGI (defined in URL of HTTP → General) is from your
target device. For example, move=down.
z
Message: message will show up in the form of Message = PTZ down. If your target
device didn’t support the parameter of message, you can’t see the message. So you
can just take the message as a note. For example: PTZ down.
Effective Period:
Set the period when the periodical sending is effective.
z
Always: The periodical sending is always effective.
z
Schedule: You can specify the period when the periodical sending is effective in the
schedule setting in the other section.
Note: You can set schedule function at schedule screen. (Please go “Setting →
Advanced → Schedule → Setting”) For more details, you can check
„ 9.5 Schedule
Click Schedule on the Advanced mode menu, the Schedule setting menu appears. This
is the same menu as the setting menu which is displayed when you click Schedule to set