AirLive WN-5000R - Manual (Page 13)

Chapter 2: System and Network Setup
2-1 Build network connection
Please follow the following instruction to build the network connection between your new WIRELESS router
and your computers, network devices:
1. Connect your xDSL / cable modem to the WAN port of router by Ethernet cable.
2. Connect all your computers, network devices (network-enabled consumer devices other than computers,
like game console, or switch / hub) to the LAN port of the router.
3. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’ socket of the router.
4.
Please check all LEDs on the front panel. ‘PWR’ LED should be steadily on, WAN and LAN LEDs should
be on if the computer / network device connected to the respective port of the router is powered on and
correctly connected. If PWD LED is not on, or any LED you expected is not on, please recheck the cabling,
or jump to ‘4-2 Troubleshooting’ for possible reasons and solution.
WN-5000R User’s Manual
10