1-2 add a new qos rule – AirLive WN-5000R User Manual
Page 72
Bandwidth (2):
bandwidth in kbits. To disable download bandwidth limitation, input ‘0’ here.
Total Upload
You can set the limit of total upload
Bandwidth (3):
bandwidth in kbits. To disable upload bandwidth limitation, input ‘0’ here.
Current QoS
All existing QoS rules will be displayed here.
Table (4):
Add (5):
Click ‘add’ button to add a new QoS rule, see section 3-1-2 ‘Add a new QoS rule’
below.
Edit (6):
If you want to modify the content of a specific rule, please check the ‘select’ box of
the rule you want to edit, then click ‘Edit’ button. Only one rule should be
selected a time! If you didn’t select a rule before clicking ‘Edit’ button, you’ll be
prompted to add a new rule.
Delete
You can delete selected rules by clicking this
Selected (7):
button. You can select one or more rules to delete by check the ‘select’ the box of
the rule(s) you want to delete a time. If the QoS table is empty, this button will
be grayed out and can not be clicked.
Delete All (8):
By clicking this button, you can delete all rules currently in the QoS table. If the
QoS table is empty, this button will be grayed out and can not be clicked.
Move Up (9):
You can pull up the priority of the QoS rule you selected by clicking this button.
Move Down (10):
You can lower the priority of the QoS rule you selected by clicking this button.
Reset (11):
If you want to erase all values you just entered. Click ‘Reset’.
3-1-2 Add a new QoS rule
After you click ‘Add’ button in QoS menu, the following message will appear:
WN-5000R User’s Manual
69