AirLive WN-5000R - Manual (Page 79)

Add (7): Add the mapping to virtual server table.
Reset (8): Remove all inputted values.
Virtual Server All existing virtual server mappings will be
Table (9): displayed here.
Delete Please select a virtual server mapping by clicking
Selected (10): the ‘Select’ box of the mapping, then click ‘Delete Selected’ button to remove the
mapping. If there’s no existing mapping, this button will be grayed out.
Delete All (11): Delete all mappings existed in virtual server table.
Reset (12): Unselect all mappings.
After you finish with all settings, please click ‘Apply’ (13) button, then Please press Apply.
WN-5000R User’s Manual
76