AirLive WN-5000R - Manual (Page 54)

1
2
3
4
5
This wireless router can be work in 4 modes:
a. AP: Standard wireless AP (access point).
b. AP Bridge-Point to Point: Connect this router with another wireless router, to expand the scope of network.
c. AP Bridge-Point to Multi-Point: Connect this router with up to four other wireless routers, to expand the
scope of network.
d. AP Bridge-WDS: Connect this router with up to four WDS-capable wireless routers, to expand the scope of
network.
NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to Multi-Point’ mode,
wireless router is operated in wireless bridge dedicated mode – wireless router is
only used to expand the scope of network, and no wireless clients will be accepted.
If you want to use your wireless router to expand the scope of network, and also
accept wireless clients, please select ‘AP Bridge-WDS’ mode.
Please select a proper operation mode you want to use from ‘Mode’ dropdown menu (1), and continue on
other operation mode specific settings:
AP - Please go to section 2-7-1-1
AP Bridge-Point to Point - Please go to section 2-7-1-2
AP Bridge-Point to Multi Point - Please go to section 2-7-1-3
AP Bridge-WDS - Please go to section 2-7-1-4
WN-5000R User’s Manual
51