Allen&Heath DR66 USER GUIDE - Manual (Page 3)

DR66 & DR128 Installer User Guide 3
Introduction
This user guide refers to the Allen & Heath DR128 and DR66 digital mix processors loaded with
Version 2 or later operating software. Units loaded with earlier versions can be updated to take
advantage of the features available from Version 2. Further information and the software itself can
be downloaded from our Web site: http://www.allen-heath.com
This guide is intended for the technical engineer in charge of the installation and configuration of
the audio system. It is not intended for the day-to-day user who should be provided with operating
instructions specific to the application by the installer. The function, application, installation and
technical details of the DR hardware are described. For details on the configuration of the DSP
resources please refer to the Windows
® Help file in the PC WinDR System Manager software
provided with the unit.
We are able to offer further product support through our worldwide network of approved dealers
and service agents. You can also access our Web site on the Internet for information on our full
product range, distribution network and technical support. To help us provide the most efficient
service please keep a record of the serial number and purchase details to be quoted in any
communication regarding this product. The serial number is located on the rear panel.
Contents
Warranty and Contact Details ............ Inside Front
Important Safety Instructions............................... 4
Mains Voltage Setting and Plug Wiring............... 5
Welcome to the DR Series .................................. 6
Main Features...................................................... 7
System Block Diagram ........................................ 8
Basic Principles ................................................... 9
Front Panel ........................................................ 10
Rear Panel ......................................................... 12
Installation.......................................................... 14
Connecting Power Supplies .............................. 15
Earthing.............................................................. 16
Configuring the Hardware.................................. 17
Starting with the Default Configuration.............. 17
Starting with WinDR........................................... 17
Calibration Adjustments available ..................... 18
Removing the Top Cover................................... 18
Labelling the Function Keys .............................. 19
Working with Audio Signals ............................... 19
Calibrating the XLR Mic/Line Inputs .................. 20
Calibrating the RCA Phono Line Inputs ............ 21
Calibrating the XLR Line Outputs...................... 22
Remote Switch Wiring ....................................... 23
Remote Output Wiring ....................................... 24
Fitting the DSPx Expander Option .................... 25
Fitting the DSPd Delay Option .......................... 25
Configuring the Software ................................... 26
Software Compatibility Issues ........................... 26
Installing the WinDR System Manager ............. 27
Using WinDR ..................................................... 28
Configuring Control............................................ 29
Networked Computer System............................ 29
SysNet................................................................ 29
Using the DR...................................................... 30
The Front Panel LCD Display............................ 30
The Function Keys............................................. 31
The Function LEDs ............................................ 33
The Setup Keys ................................................. 34
Adjusting LCD Contrast ..................................... 35
Adjusting Clock Time ......................................... 35
Adjusting Day of Week ...................................... 35
Appendix A : Earlier Version 1 Software ........... 36
Appendix B : Technical Specification ................ 39
Appendix C : DR66 Architects Specification ..... 40
Appendix D : DR128 Architects Specification ... 41
Installation Log Sheet ........................................ 42
DR128 Front Panel Label Template.................. 43